YDSA

Boat Details

A stunning Maxi 1050, lightly used and professionally cared for cruiser, beautifully set up, and offers as excellent package complete with Eberspacher heating, Raymarine E80 In the cockpit and chart table, Volvo D1 Sail drive engine package, 3 Bladed folding Propellor, North 105% Furling genoa, cruising chute, Spinnaker pole, Viewings highly recommended through Parkstone Bay Yachts, 01202 724 917

Manufacturer Provided Description

Fast, smooth and with excellent performance - the natural choice for seekers of quality from inside out to the smallest detail. Many say among one of the most beautiful yachts on the market. Superior performance and sailing characteristics that has to be experienced!

Additional Description

Interior in mahogany covered with 3 layers of varnish to a satin finish. Acid curing semi-gloss alkyd varnish. All cushions in suede velour fabrics. Teak-Coto laminate plywood floors 18mm. All doors and drawers have push-button locks to keep closed. 4x large pillows and 4x small pillows, two with Maxi logo. SALOON 2x seat cushions starboard and 1x seat cushion port. 2x backrest cushions which can be raised for sleeping. 1x fill in cushion. Saloon table removable for racing. Flaps for ease of passage. Stainless steel legs through-bolted into structural grid and wooden floors. 4x louvered doors in lockers. 2x shelves aft of chainplate boxes. Hull cladding in ribbed mahogany. Curtains fitted in cov-ered tracks. Detachable panels in ceiling. Solid mahogany mast trims. Fabric cover for mastsection above saloon table. Access to storage below seat cushions. Handrail in ceiling. Double berth on port when extension pulled out.

Additional Description

Stainless steel handhold. Laminate countertop in cream colour. Wood trim on countertop outer edge. Stainless steel double sink. 2x shallow drawers & 1x deep drawer. Top loaded fridge Isotherm w/ Danfoss compressor 40L. Waste bucket under sink. Slid-ing doors above stove. 1x hatch below stove. 1x hatch outside of stove. 2x doors under sink. Purpose made storage of service in locker.

Additional Description

A three-cylinder Volvo Penta MD2020 engine with a MS25S saildrive. Freshwater cooled. Teleflex Morse engine controls. Volvo Penta fuel filter. Vetus vacuum valve. Vetus muffler. Well soundproofed engine room. Folding 2-blade propeller.

Additional Description

White, high-temperature NGA gelcoat is sprayed up in the moulds. The hull is laid up by a combination of hand lay-up and spray lay-up in a female mould. The laminate is then hand consolidated. The hull is partially laminated in iso-polyester, partially in DCPD-Ortho polyester. A sandwich laminate made of 15mm PVC core is used on the topsides above the turn of the bilges. Chopped strand mat is used as reinforcement with woven roving in the centreline and uni-directional glass in high load areas. The keel area is a solid laminate as well as the laminate around major through hull fittings. Smaller through hulls have the edges of the sandwich treated with a sealer. White topcoat on the hull in all lockers, bilges and similar exposed areas. Striping with blue vinyl tape.

Additional Description

White, high-temperature NGA gelcoat is sprayed up in the mould. The deck is laid up by a combination of hand lay-up and spray lay-up in a female mould with integrated anti-slip surfaces. The deck is laminated in DCPD-Ortho polyester. A sandwich laminate made of 15mm PVC core is used in all horizontal surfaces. Chopped strand mat is used around recesses for hatches. All fittings are fixed in either single laminate or a sandwich with a marine plywood or aluminium core. The deck is glued to the hull using poly-ester putty, and subsequently bolted using M8 bolts c-c 200mm. The deck includes grooves and platforms for hatches and lids. Striping with blue vinyl tape. White topcoat in all exposed areas. Glove boxes in the cockpit with teak frames.

Additional Description

1x seat cushion. 1x chart table w/ wooden trims all around. 1x drawer and 1x door below chart table. Storage under nav seat. Hanging locker with louvered door. 1x storage behind locker door. Electrical panel on hinged door.

Disclaimer

Parkstone Bay Yachts provides the details of this vessel in good faith but cannot guarantee the accuracy of the information set out in these particulars, and do we warrant the condition of the vessel. The particulars are intended as a guide only and do not constitute a term of any contract. A prospective buyer is advised to check the particulars and specifications and where appropriate instruct his agents, or his surveyors, to fully inspect the vessel and/or to have a sea trial of the vessel. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Specifications

  • BuilderMaxi
  • LocationUnited Kingdom
  • Built2005
  • Price£92,500
  • Length10.5 m
  • Hull MaterialFiberglass
  • Cabins2
  • Bathrooms1
  • Cruising Speed5 kn
  • Max Speed7 kn
  • Beam3.25 m
  • Dry Weight24,933.62 lb
  • Water Tank Capacity31.7|imperial gallon
  • Fuel Tank Capacity21.14|imperial gallon
  • Engine 1
    • Make: Volvo
    • Model: D1
    • Year: 2005
    • Fuel Type: diesel
    • Propeller Type: Inboard

Contact Seller

Parkstone Bay Yachts
Parkstone Bay Marina Turks Lane Poole, Dorset BH14 8EW United Kingdom
View all boats from this seller Email Call+44 (0)1202 724917