Seajet have perfected the control of biocide release and have developed an advanced self-polishing co-polymer system (SPC) which is stable and predictable, even over long periods of time.

Please be aware that anti-foul content is subject to legislation which differs from country to country.

Self Polishing (eroding) types

Seajet have perfected the control of biocide release and have developed an advanced self-polishing co-polymer system (SPC) which is stable and predictable, even over long periods of time.

Click to view further information:-

033 Shogun

A very popular product offering protection in all kinds of fouling conditions matched to high value for money.

034 Emperor

Great performance against slime and weed, will work at high speeds of up to 40 knots, suitable for all hull types including aluminium and a popular choice for motorboat owners. Bright colours due to copper thiosyanate (white copper).

039 Platinum

Top of the range product and ideal for club racers or blue water cruisers needing multi-season performance, where a lift out onto dry land might not be possible.

Platinum works particularly well in higher temperature waters where fouling is often at its worse.

036 Shogun Eco

For great antifouling performance combined with the need to care for our environment, Seajet’s 036 Shogun-Eco is a new copper free self polishing solution.

Supplied in a choice of colours.

Hard Types

037 Coastal

Suited to the more moderate fouling areas of Northern Europe and the Atlantic and can last for up to three seasons. Great for drying moorings.

Non biocidal, foul release types

Pellerclean

A transparent silicon based product for the protection of propellers, stern gear and trim tabs. Supplied as a boxed set containing a bonding primer, hardener, topcoat, protective safety gloves and a small brush, for the hard to get at areas.

Primers and binders

Following a thorough removal of slime and fouling from the previous season, and provided the hull is in a sound condition, Seajet anti-foul can usually be applied straight away. If you are in any doubt, however, check the compatibility of the existing coating beforehand or use Seajet’s range of primers and binders, which have excellent adhesion to the majority of existing coatings.