View Full Version : Aquair 100 Hoist in Rig Kit
I am looking for a hoist in rig kit for our Aquair 100 water generator, is there such a beasty about?
I made my own. 2 off stainless steel tubes that fit in the pivots, drilled to take the pins, then a hole in the ends to take a big shackle. There was enough twist in the rope for it to swing to the wind, two ropes on the bottom keep it from swinging. I used off cuts of tube from a marine engineers.
Thanks for the reply but it is the whole kit with prop I am looking for to convert a towed water gen into a wind unit.
I can offer you the vane that will turn it into the wind.
Powered by vBulletin® Version 4.1.12 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.