| saltwatergypsy |
| (regular) |
| 09/11/2007 10:28 |
|
fouled stern gear
|
I was aboard a friends boat when a fouled line wrapped round the prop shaft and pulled the engine back so that the engine mountings fractured. Since then I have installed a 6mm rigging wire rope between the bottom of the skeg and aft end of the keel on my Seastream 43 and have run over several lines without problems. Lucky? Probably, but I think it helps.
| Romeo_Whisky |
| (regular) |
| 01/12/2007 20:05 |
Re: fouled stern gear
|
Hi Hugh,
I have a better set up on my boat. No engine, so no prop, and a rudder stepped into the keelson.
Ah the joys of the simple life.
See ya,
Robbie
Paragon2
| saltwatergypsy |
| (regular) |
| 10/12/2007 11:19 |
|
|
Re: fouled stern gear
|
Hi Robbie,
but is your boat actually afloat!!!!!
cheers Hugh