|
Aeolus
|
|
(regular)
|
|
14/05/2008 16:42
|
|
|
|
|
|
|
|
Prices for replacing standing rigging
|
|
I've just been quoted ~£140 plus VAT per shroud/forestay/backstay for new standing rigging. This excludes fitting.
Does that sound expensive? It's for a 29 foot masthead sloop.
|
|
srp
|
|
(regular)
|
|
14/05/2008 16:54
|
|
|
|
|
|
|
Re: Prices for replacing standing rigging
|
|
Depends on the fittings you have specified on the ends, and whether you want new bottlescrews. The rigging wire itself is quite cheap (about £1 a metre for 4mm), but a swaged terminal would cost around £16 each end - this according to the last bill I had from Spencers Rigging in February.
|
|
|
Re: Prices for replacing standing rigging
|
|
Sounds good to me. But what does that include?
|
|
Aeolus
|
|
(regular)
|
|
14/05/2008 17:22
|
|
|
|
|
|
|
|
Re: Prices for replacing standing rigging
|
|
Just to clarify - that's £140 plus VAT for each shroud, not including new bottlescrews and not including fitting.
If swaged terminals are £16 each and 6mm wire is around £3 per metre, then a 12 metre long shroud should cost £16 x 2 + £3 x 12 which works out at £68. I'm being charged double that. Or is my calculation flawed?
|
|
Peegee
|
|
(regular)
|
|
14/05/2008 17:34
|
|
|
|
|
|
|
|
Re: Prices for replacing standing rigging
|
|
I took all mine off(mast already down) and took it along to a local firm in Sittingbourne Kent. All done with new bottle screws,swaged terminals,and they even supplied the split-pins. under £300 the lot for 27'masthead rig
|
|
|
Re: Prices for replacing standing rigging
|
|
Sounds expensive. Most riggers now use bottlescrews that have one end that swages on to the wire, so each shroud has one swage and one bottlescrew included.
|
|
|
Re: Prices for replacing standing rigging
|
|
Cost me £400 for split backstay, forstay, shrouds and fore and aft lowers and new bottle screws all round.26 foot sloop.
|
|
|
Re: Prices for replacing standing rigging
|
|
Try a quote from Jimmy Green. I was very surprised at his prices when I re-rigged last October. Service and supply time was excellent too.
|
|
30boat
|
|
(regular)
|
|
14/05/2008 19:52
|
|
|
|
|
|
|
Re: Prices for replacing standing rigging
|
|
Very expensive. I've been quoted £103 for each cap for my Fulmar and that's in 7mm Dyform. By ZSpars by the way.
|
|
|
Re: Prices for replacing standing rigging
|
|
Quote:
I took all mine off(mast already down) and took it along to a local firm in Sittingbourne Kent. All done with new bottle screws,swaged terminals,and they even supplied the split-pins. under £300 the lot for 27'masthead rig
PeeGee, what firm was that in Sittingbourne, please?
|
|
|
Re: Prices for replacing standing rigging
|
|
I'd be grateful for the firm's name as well.
|
|
|
Re: Prices for replacing standing rigging
|
|
I did my 33 footer for about £500 all up including swageless fittings and bottle screws.
|
|
|
Re: Prices for replacing standing rigging
|
|
TS Rigging in Maldon. 26ft Centaur, 6 wires and end fittings in 5 and 6mm £3-400. Sounds like your quote is on the expensive side.
|
|
Aeolus
|
|
(regular)
|
|
14/05/2008 23:16
|
|
|
|
|
|
|
|
Re: Prices for replacing standing rigging
|
|
Thanks one and all. Back to the negotiation!!
|
|
Gandy
|
|
(regular)
|
|
15/05/2008 14:17
|
|
|
|
|
|
|
Re: Prices for replacing standing rigging
|
|
You guys are all getting much better prices than we paid last year! I wonder if the market's changed. We were £650 for a 26 footer, including bronze rigging screws. Most places were a lot higher, some were higher even with SS screws.
|
|
MM5AHO
|
|
(regular)
|
|
15/05/2008 20:02
|
|
|
|
|
|
|
Re: Prices for replacing standing rigging
|
|
Bought a complete set of standing rigging this last winter for a 32' Rival. Including two insulators for the backstay (which were £273 fitted into the stay), the total was £902. This includes forestay @8mm, backstay @7mm, 2 sidestays @7mm and 4 shrouds @6mm all with swaged eyes both ends except the forestay one end only. (furler). Old stays collected, (to verify sizes) new ones and old ones delivered back. I thought that good value.
|