| robbieg |
| (regular) |
| 17/05/2008 15:00 |
50mm O/D stainless steel tube-Off cut
|
I need a short length 2/3 inches of 50 mm 316 s/s tube-anyone able to help? Thanks.
| Login_name |
| (regular) |
| 18/05/2008 06:35 |
Re: 50mm O/D stainless steel tube-Off cut
|
If you have no luck here try; http://www.metalsontheweb.co.uk/asp/ProductIndex.asp?mat=Stainless+Steel&Shape=Round%20Tube
| robbieg |
| (regular) |
| 18/05/2008 19:00 |
|
Re: 50mm O/D stainless steel tube-Off cut
|
Thanks good site. Can't see 50mm tube however so if anyone has an offcut they are willing to part with for some beer tokens please shout.
| Rogershaw |
| (regular) |
| 19/05/2008 08:10 |
|
Re: 50mm O/D stainless steel tube-Off cut
|
Will have a look tonight
What wall thickness do you need. I know I have some 50mm i/d thick wall and I did have 50 o/d 1.6 or 2 mm wall but may have used it all
Roger Shaw
| robbieg |
| (regular) |
| 19/05/2008 18:02 |
|
Re: 50mm O/D stainless steel tube-Off cut
|
Roger,
If you have something that would be great. As thin walled as you have but its not to critical. Only need 2 inches or so of the stuff and I'm struggling to track any down.
Thanks.
| Rogershaw |
| (regular) |
| 20/05/2008 07:24 |
|
Re: 50mm O/D stainless steel tube-Off cut
|
Had a look last night and I have 3 off 50 o/d rings 15 mm long and a piece also 50 o/d by 600 mm long and its polished on the outside.
I could cut a small piece off for you. Let me know the exact length you need and I will cut it this week end and drop it in the post to you.
PM me with postal address.