Graham_Wright
regular
Reged: 30/12/2002
Posts: 980
Loc: Gloucestershire
|
|
I fitted TekDek to my weather deck and am very pleased with the results.
Does anyone know if there is anything similar for cabin soles (in trad teak/holly or other)?
--------------------
I'd rather be naked 
|
alan17
regular
Reged: 12/03/2006
Posts: 255
|
|
Is it not possible to use the same stuff ie TekDek?
|
Cuchilo
regular
Reged: 19/04/2003
Posts: 4457
Loc: London
|
|
There is a ply that is Teak and Holly faced .
--------------------
Dont come running to me if you fall over and break your leg .
|
deisel
regular
Reged: 30/01/2008
Posts: 90
Loc: rye, sussex
|
|
Look On Toomer & Hayters Website.
|
pcatterall
regular
Reged: 02/08/2004
Posts: 801
Loc: East Lancashire
|
|
Robbins Timber have some good plys for this job
|
Jonny_H
regular
Reged: 15/08/2006
Posts: 1496
Loc: Me - Newcastle, Boat - Fleetwo...
|
|
We have a plastic veneer 'teak and holly' look alike which has been glued down to our existing floor panels (by the previous owner). Looks ok, but the glue has started to lift in some places meaning it has lifted on one panel - also its very delecate and prone to cracking at the edges when the floor is lifted - wouldn't recommend it.
Jonny
--------------------
www.freewebs.com/jksailing
|
Tranona
regular
Reged: 10/11/2007
Posts: 1084
|
|
I bought 6mm teak and holly ply and epoxied it straght onto the existing sole boards. About £120 a sheet (just over 40 a sq m)
|
Graham_Wright
regular
Reged: 30/12/2002
Posts: 980
Loc: Gloucestershire
|
|
Robbins sell ply and also a plastic laminate ply but it is very expensive.
--------------------
I'd rather be naked
|
moondancer
regular
Reged: 08/12/2001
Posts: 986
|
|
Wilks do an indoor version of TekDek with a choice of either white or black sealant lines between the fake teak strips. I think it looks pretty good and is warm on the feet.
|
Captainslarty
regular
Reged: 12/08/2007
Posts: 2012
Loc: Currently La Coruna Spain
|
|
We were considering ply for the sole, (Imitation teak n holly) but have decided to go the right way (for us !) and fit 10mm teak strips 50 mm wide with holly or eucolyptus as the filler piece. (This is planned - not done yet as we are still in the middles of the cabin refit). plan is to put a simple rabbet in the edge of the teak strips with a router - 5mm deep by 6 mm wide - and then after laying the floor infil with the contrasting wood.. sand and satin varnish.
Here in spain it is cheaper than ply. and looks so much nicer - and can be refinished if needed.
Joe
--------------------
PM me for info re SSB's etc. Bought, sold, repaired, fitted and optimised.
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
