Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2005
    Posts
    795

    Default Volvo seawater pump

    I recently queried a leak from the seals on the water pump on my Volvo 2020. Good advice from the forum including a link to the manual from VicS, thank-you. BUT the manual does not show removal of the pump. The manual like my operators manual show a pump held with 2 bolts. Mine has 4, 2 are easy(ish) but the other 2 are studs from behind the pump into tapped holes in the front of the pump. Access to one of these is difficult and the other impossible unless I remove the engine mount. This seems stupid, or is it me, am I missing a trick. anyone else encountered this?

  2. #2
    Join Date
    Nov 2009
    Posts
    42

    Default

    I've had that problem before! Support the engine with blocks of wood, remove the mount & take off the pump!

  3. #3
    daveyw is online now Registered User
    Location : Co. Armagh
    Join Date
    Apr 2009
    Posts
    1,404

    Default

    Quote Originally Posted by Andyroonot View Post
    I've had that problem before! Support the engine with blocks of wood, remove the mount & take off the pump!
    Who the hell designs an engine like that!!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •