I'm sure this has come up before but I'm struggling to find a pipe clamp or U bolt to fit around the 913 mounting pole, 1 3/4" (45mm) od. Any ideas?
What I'm trying to do is brace the pole to my pushpit which is 1" od so the next part of my question is has anyone any ideas how to do it?
Results 1 to 10 of 15
Thread: Rutland 913 installation
04-04-12, 14:36 #1
Rutland 913 installation
04-04-12, 14:46 #2
04-04-12, 14:50 #3
Thanks, I've sent them an enquiry.
04-04-12, 14:59 #4
You could always get some of their bits, and because they are 316 marine grade stainless they can be welded to custom make something that will fit.
The welding and the twisty plate cost around £30-£40 IIRC
Almost forgot (hence the edit) that it's better to get a bigger clamp and pad it out with tough rubber to absorb vibrations and noise from the wind gen
Last edited by snooks; 04-04-12 at 15:03.
04-04-12, 15:52 #5Registered User
Location : S. Hampshire
- Join Date
- Oct 2004
For the last six years mine has survived on a stainless exhaust clamp from Kwik FitDef: Yachting - a way of spending the kids inheritance
04-04-12, 18:23 #6
See my previous posting http://www.ybw.com/forums/showthread...light=seateach where I posted a photo of the small clamp kit I bought from SeaTeach in Emsworth.
As well as the four U-bolts it included a small stainless plate with the four holes drilled in it.. Easy to make but with that square plate it's all very easy to fix.
Last edited by Martin_J; 04-04-12 at 18:25. Reason: Kit included both the small and the large U-bolts.
04-04-12, 19:34 #7Registered User
Location : torbay
- Join Date
- Apr 2009
Used two S/Steel hose clips on mine, no ploblems so far and a cheaper option
04-04-12, 21:32 #8
Forgot to add that since changing boats my Rutland is at present held on by 4 large Jubilee clips.........
yet another job to do!You never get to where you want to go if you only travel on sunny days.
05-04-12, 00:34 #9
And mine has from two welded lugs, two rigid 25mm braces coming down at 45 to the deck, one athwart and the other forward.
Where the main pole passes the pushpit I substituted steel for a multilashing/spanish windlass. Simple, neat, less energy transference( ahem , possibly)* Please add your own smiley cos the 'choices' seem a bit wubbish
05-04-12, 01:49 #10Registered User
Location : Manchester, boat in Liverpool
- Join Date
- Feb 2011
I used 3 saddle clamps, one suitable for 50mm pipe, and the other two for 25mm.
These were fabricated for about £40.
Hopefully the attached pic will show how it goes together