Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2004
    Location
    Kent
    Posts
    22

    Default DP-D1 selector question

    Hi all, I have just replaced the clutch cone, sliding sleeve etc on the D1 and was advised to change the selector due to mod changes on the clutch which I agreed with. I put the top assembly back on and all was good until I went to fit the drive cover. Went to fit the top screw and then discovered there was no thread to screw in to. The new selector hasn't got the lug with the female thread for the cover screw. I went back to VP and they are looking into it. The question is please, does anybody know if it was really necessary to fit a new selector and if so, how do you get around the problem of the missing lug.
    Thanks in advance.

  2. #2
    Join Date
    Sep 2002
    Location
    South
    Posts
    14,708

    Default Re: DP-D1 selector question

    It sounds as if the selector is a DP-E style one without the integrated lug.
    Part number 854713 is the additional bit you need ... about £20 for a triangular piece of metal with three holes in it

  3. #3
    Join Date
    Apr 2004
    Location
    Kent
    Posts
    22

    Default Re: DP-D1 selector question

    Thanks for the information. £20, that's boating....����

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Find Boats For Sale

to
to