Go Back   Yachting and Boating World Forums > Motor Boat Forum

Motor Boat Forum Jointly hosted by Motor Boat & Yachting and Motor Boats Monthly

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-11-09, 23:54
runaroundsue runaroundsue is online now
New User
 
Join Date: Sep 2008
Posts: 5
Default isolate batery

could someone tell me why we isolate the batterys on boats
Reply With Quote
  #2  
Old 03-11-09, 23:55
carlton's Avatar
carlton carlton is offline
Registered User
 
Join Date: Sep 2005
Posts: 4,654
Default

This is reason enough for me...

Reply With Quote
  #3  
Old 03-11-09, 23:55
Medskipper Medskipper is online now
Registered User
 
Join Date: Dec 2001
Location: Surrey
Posts: 1,774
Default

It stops any leakage of volts and thus stops a possibility of a flat battery. Also if the boat is not earthed out properly it cuts down on any electrolosis which will eat away at your expensive metal bits that hang under your boat! or other boat next to yours. It cuts down the fire risk as well!

Barry
Reply With Quote
  #4  
Old 04-11-09, 06:46
Piers's Avatar
Piers Piers is offline
Registered User
 
Join Date: Jun 2001
Location: Berkshire, UK
Posts: 1,517
Default

All good reasons. But it does leave the question of 'what if the bilge pumps need to operate?' But then you can also argue that even with the pumps 'live' and they started, it wouldn't take too long 'till the battery was dead in any case, unless shore power was connected and the battery charger on.
__________________
Piers du Pré
Reply With Quote
  #5  
Old 04-11-09, 12:42
Tranona Tranona is offline
Registered User
 
Join Date: Nov 2007
Posts: 4,095
Default

Quote:
Originally Posted by Piers View Post
All good reasons. But it does leave the question of 'what if the bilge pumps need to operate?' But then you can also argue that even with the pumps 'live' and they started, it wouldn't take too long 'till the battery was dead in any case, unless shore power was connected and the battery charger on.
Automatic bilge pumps should have a dedicated "always on" supply. In well maintained modern boats they should not need to operate frequently. If they do, something needs attention.
Reply With Quote
  #6  
Old 04-11-09, 12:53
capsco capsco is offline
Registered User
 
Join Date: Nov 2001
Location: North
Posts: 659
Default

Quote:
Originally Posted by Tranona View Post
Automatic bilge pumps should have a dedicated "always on" supply. In well maintained modern boats they should not need to operate frequently. If they do, something needs attention.

+1 correct answer.
Reply With Quote
  #7  
Old 04-11-09, 15:46
Philiz's Avatar
Philiz Philiz is online now
Registered User
 
Join Date: Aug 2008
Location: Staffordshire Moorlands U.K.
Posts: 619
Default

Quote:
Originally Posted by Piers View Post
All good reasons. But it does leave the question of 'what if the bilge pumps need to operate?' But then you can also argue that even with the pumps 'live' and they started, it wouldn't take too long 'till the battery was dead in any case, unless shore power was connected and the battery charger on.
If a problem occurs and the bilge pump needs to operate, better a flat battery or two than a sunk boat.
__________________
'I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered! My life is my own!'
Reply With Quote
  #8  
Old 06-11-09, 01:27
PilotWolf's Avatar
PilotWolf PilotWolf is offline
Registered User
 
Join Date: Apr 2005
Location: Aboard...
Posts: 791
Default

And if you have a separate bilge alarm connected to an outside light/siren that operates slightly later than the pump - ie with a float switch mounted higher it might keep the water level under control long enough for some one to notice and take action.

W.
Reply With Quote
  #9  
Old 06-11-09, 02:09
AndieMac AndieMac is offline
Registered User
 
Join Date: Mar 2009
Location: Tasmania, Australia
Posts: 765
Default

Quote:
Originally Posted by PilotWolf View Post
And if you have a separate bilge alarm connected to an outside light/siren that operates slightly later than the pump - ie with a float switch mounted higher it might keep the water level under control long enough for some one to notice and take action.

W.
Providing they didn't interpret the alarm as just another annoying, over sensitive, movement sensor alarm....... like slapping mast halyards, on a windy day!
Reply With Quote
  #10  
Old 06-11-09, 10:23
PCUK PCUK is offline
Registered User
 
Join Date: Jun 2005
Location: Mid Devon
Posts: 2,275
Default

Bilge Watch tells you how often your pump has run while you were away from the boat. If it increases suddenly you know something is going wrong.
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.