Sika systems are ideal for use on all types of craft, from small sailing yachts and motor boats, through to large superyachts and commercial vessels.
Whatever the job at hand, Sika has the answer:
Sikaflex 292i – Bonding
Sikaflex-292i is a non-sag, one component polyurethane adhesive with a paste-like consistency which cures on exposure to atmospheric moisture to form a durable elastomer.
Sikaflex-292i exhibits excellent adhesive properties and a high degree of mechanical strength.
Sikaflex-292i is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. Suitable to bond metals, particularly aluminium (including anodized finishes), metal primers and paint coatings (2 component systems), or ceramic materials, plastics such as GRP etc. Clear plastics and mineral glass should not be bonded with Sikaflex-292i.

Product Benefits
– Wheelmark approved
– 1 component formulation
– Elastic
– Can be over painted (check for compatibility as some single component paints may not be suitable)
– Good gap-filling properties
– Capable of withstanding high dynamic stresses
– Vibration-damping
– Non corrosive
– Electrically non conductive
– Bonds well to a wide variety of substrates

Common applications
For expert advice please refer to the relevant section from the Sika Marine Handbook in pdf format

Deck coverings / teak decks (refer to 4.1)
Bedding and sealing of fittings and hardware (4.2)
Bonding of rub rails and fenders (4.3)
Sealing sacrificial anodes (4.4)
Bonding decorative panels and work surfaces (4.5)
Bonding lightweight internal partitions (4.6)

Sikaflex 298 – Bonding
Sikaflex-298 is suitable for bonding deck covering materials made from synthetic resins, and for bedding-in and sealing of teak plank decking laid on top of the sub-deck surface.

Common applications
For expert advice please refer to the relevant section from the Sika Marine Handbook (pdf download).

Deck coverings / teak decks (refer to 4.1)